How to enable/disable User Codes on my Powerbolt 2?
How to enable/disable User Codes
If User Codes are disabled (example: when you go on vacation), the lock can only be operated by the key and turnpiece until they are enabled again.
1. Make sure the lock is unlocked and the door is open.
2. Enter your existing Mastercode.
3. Press the lock button. You will hear one beep.
4. Press 1 - 7.
5. Press the lock button. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly.
If User Codes are disabled (example: when you go on vacation), the lock can only be operated by the key and turnpiece until they are enabled again.
1. Make sure the lock is unlocked and the door is open.
2. Enter your existing Mastercode.
3. Press the lock button. You will hear one beep.
4. Press 1 - 7.
5. Press the lock button. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly.
