How do I change the Programming Code on my 264 Deadbolt?
Make sure your door is open and unlocked
1. Enter your existing PC (Programming Code).
2. Press "Kwikset" then "4" then "Kwikset"
3. Enter a new PC. It must be between 4 and 10 digits.
4. Press "Kwikset"
For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.
Note: If the lock is muted, you will not hear the lock beeping.
1. Enter your existing PC (Programming Code).
2. Press "Kwikset" then "4" then "Kwikset"
3. Enter a new PC. It must be between 4 and 10 digits.
4. Press "Kwikset"
For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.
Note: If the lock is muted, you will not hear the lock beeping.
